The new H.P. E-Z Hauler makes loading and switching from plane to plane easy.
• Just loosen the knobs (No tools needed) and slide the hold downs to fit your plane.
• You can start off with a complete set or just the Main Gear and upgrade anytime.
• The hold down knobs can be slid out of the tracks in a matter of seconds so you can haul other items as needed.
• If you buy the longer tracks, depending on your planes, you can put a second set of hold down knobs on a set of tracks and mount two planes side-by-side.
·Save money off the total of each H.P. E-Z Hauler complete set you purchase.
• Please fill free to phone or e-mail if you have any questions.
60 " wingspan biplane on a E-Z Hauler
Funtana 100 x & 108" wingspan 1/4 scale cub 1/4 scale Tail on single T -Track
Shown without base boards,Plane removed for clarity.
 
Heavy duty bungee cords & Hold Down Knobs
T-Tracks
The T tracks can be used with or without the base boards.
They come in 18 inches, 24 inches, 36 inches, and 48 inches in length and include screws.
Although they can be used without the baseboard, we strongly recommend the baseboard to protect the track and to make it easier to load and unload other items you may carry.
Base Boards
The base boards can be attached in two ways:
(1) directly to your floor with the supplied screws.
(2) using industrial-strength Velcro (sold separately) to attach to your carpet for lighter planes.
They come in 18 inches, 24 inches, 36 inches, and 48 inches in length.
_____________________________________________________________________
To Order
Main Gear Track System & Hold Down Knobs
Track System For Main Gear Has (2) T Tracks and hardware, 4 Hold Down Knobs& 4 bungee cords
• 18 inches x 2 and hardware $ 31.00
• 24 inches x 2 and hardware $ 33.00
• 36 inches x 2 and hardware $ 38.00
• 48 inches x 2 and hardware $ 40.00
Tail Track System & Hold Down Knobs
Track System For Tail Stand Has (1) T Track and hardware, 2 Hold Down Knobs& 2 bungee cords
• 18 inches x 1 and hardware $ 25.00
• 24 inches x 1 and hardware $ 27.00
• 36 inches x 1 and hardware $ 29.00
• 48 inches x 1 and hardware $ 31.00
Base Boards
We Would Be Happy to supply you with the baseboard for your E-Z Hauler, however we supply with each set of Main Gear haulers and Tail haulers the measurements needed to make your own baseboards. This will save you money both in the cost of the baseboard as well as the shipping. Once again we would be happy to supply you with the boards if you choose to purchase them. The boards come in their natural wood unpainted. Some filling and sanding may be required before painting if you choose to do so.
For Main Gear
• 18 inches $ 13.00
• 24 inches $ 15.00
• 36 inches $ 17.00
• 48 inches $ 19.00
For Tail Gear
• 18 inches $ 10.00
• 24 inches $ 12.00
• 36 inches $ 14.00
• 48 inches $ 16.00
Hold Down Knobs
Extra hold down knobs to add to your tracks
1 hold down knob $ 4.50
Velcro
Our industrial-strength Velcro can be used on the bottoms of our base boards then attached to your carpet. The Velcro is high strength and has a high strength self-sticky back that allows you to attach it to the base boards. The Industrial-strength Velcro is for lighter planes only.
Per Foot $ 1.75
( 1 foot of Velcro is needed for each foot of base board.)
Please fill free to phone or e-mail if you have any questions.
To Order: You can order by contacting us through email or phone. Payment will be set up through paypal, credit cards or check.
Roy Seals/H.P.Pilots
6942 Audrain Road 9137
Centralia, MO 65240
573-682-2333
Cell 920-344-8866
Cell 920-344-0266
royseals@wi.net
H.P.Pilots © 12/1/2000 -2007
| 
